USB-OEM Interface
USB-OEM Device Usage
The USB-OEM protocol allows for the reader to be identified as one of two different
types of barcode scanners. Depending on what other scanners you may already have con-
nected to a USB-OEM POS, you may need to change this setting to enable all devices to
communicate.
Options are:
USB-OEM Device Usage = Handheld Scanner
88
• Table Top Scanner
• Handheld Scanner
It may be necessary to switch device usage when connecting two
readers/scanners of the same type to a POS system.
NOTE
ENTER/EXIT PROGRAMMING MODE
USB-OEM Device Usage = Table Top Scanner
DEFAULT
®
PowerScan
PD7100 Corded