Laser Pointer Period - Datalogic Powerscan PD7100 Product Reference Manual

Laser Pointer Period

This option specifies the period of the laser pointer blink during scanning. The laser
pointer will be activated for the time specified by
OFF then ON at a 50% duty cycle and a repeating period set by
Laser Pointer Period = 500 ms
Laser Pointer Period = 1.5 Seconds
Product Reference Guide
ENTER/EXIT PROGRAMMING MODE
Laser Pointer Period = Laser Pointer Blinking Off
Laser Pointer Period
then start blinking
Laser Pointer Control
Laser Pointer
DEFAULT
Laser Pointer Period = 1 Second
Laser Pointer Period = 2 Seconds
Period.
43