Scanning Features; Scan Mode - Datalogic PowerScan PD7100 Corded Product Reference Manual

Scanning Features

Scan Mode

Selects the scan operating mode for the reader. Selections are:
Trigger Single —
lowing occurs:
- Scanning Active Time
- a label has been read
- the trigger is released
This mode is associated with typical handheld reader operation: when the trigger is
pulled, scanning starts and the product scans until the trigger is released, or a label is read,
or the maximum
Trigger Hold Multiple —
scans until the trigger is released or
not disable scanning.
label while in this mode.
Trigger Pulse Multiple —
until Scanning Active Time
Double Read Timeout
mode.
Flashing —
controlled by
tinuously, when Flash is OFF scanning is deactivated.
Always On —
If the trigger is pulled, the reader acts as if it is in
Timeout
Stand Mode —
tomatically when an item is placed in reader's field of view. If the trigger is pulled, the
reader acts as if it in single read mode.
reads of the same label while in this mode.
Trigger Object Sense —
is required to activate the decoder.
1. Controlled by
Product Reference Guide
When the trigger is pulled, scanning is activated until one of the fol-
has elapsed
Scanning Active Time
When the trigger is pulled, scanning starts and the product
Double Read Timeout
When the trigger is pulled, continuous scanning is activated
has elapsed or the trigger has been released and pulled again.
prevents undesired multiple reads of the same label while in this
1
1
The reader flashes on and off regardless of the trigger status. Flash rate is
Flash On Time and Flash Off
No trigger pull is required to read a barcode. Scanning is continually on.
prevents undesired multiple reads of the same label while in this mode.
1
No trigger pull is required to read a barcode. Scanning is turned on au-
This mode is similar to Stand Mode, except that a trigger pull
Flash On Time.
has elapsed.
has elapsed. Reading a label does
Scanning Active Time
prevents undesired multiple reads of the same
Time. When Flash is ON the reader reads con-
Trigger Single
Double Read Timeout prevents undesired multiple
1
Scanning Features
Mode. Double Read
31