Ps Menu; Changing The Ps Menu; Ps Menu Parameters - Gestetner P7245 Hardware Manual

Making Printer Settings Using the Control Panel

PS Menu

You can set conditions when using Postscript for printing.

Changing the PS menu

Follow the procedure below to change the setting for date format.
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [PS Menu], and then press the {q Enter}
key.
4
C
Press the {U} or {T} key to display [Data Format], and then press the {q En-
ter} key.
D
Press the {U} or {T} key to select [TBCP], and then press the {q Enter} key.
Wait two seconds. The [Data Format] screen appears.
E
Press the {On Line} key.
The initial screen appears.

PS Menu parameters

This section explains about parameters that can be set on the Postscript menu.
❖ Data Format
You can select the data format.
• Binary Data
• TBCP
This setting is effective when using a parallel, USB, or EtherTalk connection.
When you use a parallel or USB connection, the print job is canceled if binary
data is sent from the printer driver.
When you use an Ethernet connection, the print job is canceled if:
• The printer driver data format is TBCP and the data format selected using
the control panel is Binary Data.
• The printer driver data format is binary and the data format selected using
the control panel is TBCP.
Note
❒ Default: TBCP
152