Deleting Stored Print Files - Gestetner P7245 Hardware Manual

D
Press the {U} or {T} key to display the file you want to print, and then
press the {q Enter} key.
If you set a password in the printer driver, a password confirmation screen
appears. Enter the password.
Enter the new number of sets using the {U} or {T} key. You can enter up to
999 set.
E
Press the {q Enter} key.
The "To print, press Escape 3 times" message appears. Then the file selection
screen reappears.
F
Press the {On Line} key.
The initial screen appears.
Note
❒ When the number of set quantity is changed, the changed quantity is ap-
plied to all selected files.
❒ To stop printing after printing has started, press the {Job Reset} key. A
Stored Print file is not deleted even if the {Job Reset} key is pressed.
❒ The Stored Print file that sent to the printer is not deleted unless you delete
a file or select [Del. All Stored].
❒ You can change a password after sending files to the printer using Web Im-
age Monitor. For details about changing the password, consult your ad-
ministrator.
Reference
For details about setting printer drivers, see the printer driver Help. You
can also print or delete a Stored Print file from Web Image Monitor. For de-
tails, see Web Image Monitor Help.
For details about the [Del. All Stored], see p.140 "Auto Del.Stored".

Deleting Stored Print Files

Deleting a selected Stored Print file only
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Stored Print], and then press the {q En-
ter} key.
C
Press the {U} or {T} key to display [Delete One File], and then press the {q
Enter} key.
The file name and the time when the job was stored appear.
Depending on the security settings, certain print jobs may not be displayed.
Stored Print
3
103