Installing The Postscript 3 Printer Driver (Windows 2000) - Gestetner P7245 Hardware Manual

Preparing for Printing
M
Check that the port of the selected printer is displayed in [Port:].
N
Configure the default printer as necessary.
O
Click [Finish].
1
The printer driver installation starts.
P
After the installation is completed, select one of the options to restart the
computer either now or later, and then click [Finish].
Restart the computer to complete installation.
Note
❒ Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See p.50 "If a
Message Appears during Installation".

Installing the PostScript 3 Printer Driver (Windows 2000)

Important
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
❒ In an IPv6 environment, you cannot use the LPR Port. Use the SmartDevice-
Monitor port.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local printer], and then click [Next >].
G
Click [Create a new port:].
28