Gestetner P7245 Hardware Manual page 286

Type
EU 4 holes
Northern EU 4 holes
Punching Precautions
Follow these precautions when using the punch function.
Important
❒ To use this function, the optional tray Finisher SR3040 and punch unit must
be installed on the printer.
❖ Punch printing will be canceled under the following conditions:
• When a paper type that cannot be punched is selected.
• When a paper size that cannot be punched is selected.
• If positions other than those fixed for punching are specified.
• If there are inconsistencies between the orientation in duplex mode and the
punch position.
• If there are inconsistencies between the orientation in letterhead mode and
the punch position.
• When feeding paper from the bypass tray.
• When the punch receptacle has become full and Auto Continue is set
(Printing will continue without punching after the message appears).
• If there are inconsistencies between the staple position and the punch po-
sition, when using with staple function.
Feed Direction
K
←
L
←
K
←
L
←
Printing with the Finisher
Paper Size
A4, B5, Letter
A3, B4, 11"×17"
B5, Letter
A3, B4, A4, B5, 11"×17", Le-
1 1
gal, 8 / "×13", 8 / "×13,
2 4
1 1
8"×13", Letter, 5 / "×8
2
1 1
7 / "×10 / "
4 2
3
/ ",
2
117