Gestetner P7245 Hardware Manual page 447

Mac OS Configuration
A
In the application, click [Print] on the [File] menu.
The [Print] dialog box appears.
B
In the pop-up menu, click [Job Log].
C
On the [Job Type:] pop-up menu, click [Stored Print] or [Store and Print].
• [Stored Print]
Stores the file in the printer and print it later using the control panel.
• [Store and Print]
Prints the file at once and also stores the file in the printer.
D
In the [User ID:] box, enter a user ID using up to eight alphanumeric (a-z, A-
Z, 0-9) characters, and then enter a 4-8 digit password in the [Password:] box.
File Name can also be set.
The user ID associates the user with his/her jobs.
You can assign a password to a saved document, but password assignment is
not mandatory.
The password must be entered when printing or deleting.
E
After making the necessary settings, click [Print].
The document file is saved in the printer.
To print the document, perform the following steps.
To delete the document, see "Deleting Stored Print File".
F
Press the {Menu} key.
8
The [Menu] screen appears.
G
Press the {U} or {T} key to display [Stored Print], and then press the {q En-
ter} key.
H
Press the {U} or {T} key to display [Print One File], and then press the {q
Enter} key.
The file name and the time when the job was stored appear.
To cancel printing, press the {Escape} key.
I
Press the {U} or {T} key to display the file you want to print, and then
press the {q Enter} key.
If you set a password in the printer driver, a password confirmation screen
appears. Enter the password.
J
Press the {q Enter} key.
The "To print, press Escape 3 times" message appears. Then the file selection
screen reappears.
K
Press the {On Line} key.
The initial screen appears.
278