Gestetner P7245 Hardware Manual page 311

Making Printer Settings Using the Control Panel
Note
❒ Default: 4 MB
Important
❒ When the amount of SDRAM is small and RAM Disk is set to 16 MB, print-
ing may not be possible depending on the print job and duplex printing
may be canceled. If this happens, increase the amount of SDRAM, or set
RAM Disk to 8 MB or less.
Reference
For details about the optional SDRAM module, see Hardware Guide.
❖ Notify by Email
You can specify whether or not to send an error message to a preset e-mail ad-
4 dress when an error occurs in the printer.
• On
• Off
Important
❒ After changing the setting, turn off the power of the printer briefly, and
then turn it on again.
Note
❒ Default: On
Reference
For information, see Web Image Monitor Help.
142