Gestetner P7245 Hardware Manual page 413

Using a Printer Server
• NDS Tree: To enable NDS mode, enter the name of the NDS tree you want
to log on to. Use up to 32 alphanumeric characters.
• NDS Context Name: To enable NDS mode, enter the print server context.
Use up to 127 characters.
• Operation Mode: Specify whether to use the interface board as a print serv-
er or a remote printer.
• Remote Printer No.: This item is effective when the interface board is spec-
ified as a remote printer. Enter the same number as the number of the
printer to be created on the print server (0 to 254 characters).
• Job Timeout: When the interface board is used as a NetWare remote print-
er, the printer cannot detect when a print job ends. Therefore, the printer
terminates printing when a certain period of time has elapsed since it last
received print data (i.e., when it has not received print data for a certain pe-
riod of time). Specify here this period of time (3 to 255 seconds). The initial
value is 15 (seconds).
• Frame Type: Select the frame type from the drop-down menu.
• Print Server Protocol: Select the protocol for NetWare from the drop-down
menu.
• NCP Delivery Protocol: Select the protocol for NCP delivery.
6
E
Confirm the settings, and then click [OK].
Configuration is now complete. Wait several minutes before restarting Web
Image Monitor.
F
Click [Logout].
Note
❒ To check that the configuration is made correctly, enter the following from
the command prompt.
F:> NLIST USER/A/B
❒ If the printer works as configured, the name of the print server appears as
a connected user.
❒ If you cannot identify the printer you want to configure, check the printer
name with the configuration page printed from the printer. For details
about printing a configuration page, see p.130 "Printing a Configuration
Page".
❒ If no printer names appear in the list, match the frame types of IPX/SPXs
for the computer and printer. Use the [Network] dialog box of Windows to
change the frame type of the computer.
Reference
When using the printer in a pure IP environment of NetWare 5/5.1 or Net-
Ware 6.0/6.5, see p.245 "Using Pure IP in the NetWare 5/5.1 or 6/6.5 En-
vironment".
244