Gestetner P7245 Hardware Manual page 500

2/2
Quick Installation Guide
Selecting the Panel Display
Printing the Test Page
Language
You can confirm that the printer works properly by
printing a test page (configuration page).
However, you cannot check the connection between
• You can select one of the following languages:
the printer and your computer by printing the test page.
English, German, French, Italian, Dutch, Swedish,
Norwegian, Danish, Spanish, Finnish, Portuguese,
Confirm that the printer power is turned
Czech, Polish, or Hungarian.
on.
• The default setting is English.
• If you want to use the English panel display, the fol-
lowing procedure is not necessary.
Press the { { { { { Menu} } } } } key.
• The first time you turn the printer on after installa-
tion or after replacing the fusing unit, it will make
several loud noises. This is due to the fusing unit ini-
tializing and is perfectly normal.
Turn on the printer power.
Select [List/Test Print] using { { { { { ▼} } } } } or
{ { { { { ▲} } } } } , and then press the { { { { {
AQV302S
After the printer warms up, the ready message appears
on the panel display.
Press the { { { { { Menu} } } } } key.
Press the { { { { {
The following message appears on the panel display.
Press the { { { { {
In a short time, the test printing will start.
AQV251S
Select [Language] using { { { { { ▼} } } } } or { { { { { ▲} } } } } ,
and then press the { { { { { Enter} } } } } key.
• If you cannot complete the test printing correctly,
check if an error message appeared on the panel
display. For more information on error messages,
see "Troubleshooting" in the Hardware Guide.
Select the language using { { { { { ▼} } } } } or { { { { { ▲} } } } } ,
and then press the { { { { { Enter} } } } } key.
The following message appears on the panel display
for two seconds, and the panel display automatically
returns to the previous menu .
Press the { { { { { Menu} } } } } key to return to the
initial screen.
Network Connection
Follow the procedure below to connect the printer to
the computer through the network. Prepare the hub and
other network devices before connecting the 10 BASE-
T or 100 BASE-TX cable to the machine's Ethernet
port.
• Use shielded Ethernet cable. Unshielded cables
create electromagnetic interference that could
cause malfunctions.
• The Ethernet cable is not supplied with this
machine. Select your cable according to the
network environment.
Attach the supplied ferrite core at the
printer end of the Ethernet cable.
AQV251S
Enter} } } } } key.
Connect the Ethernet cable to the
Enter} } } } } key.
Ethernet port.
Enter} } } } } key.
Connect the other end of the cable to the
printer's network, such as a hub.
• The printer's ethernet and USB ports are not
available when the gigabit ethernet board is
attached to the printer.
• For details about network environment settings, see
Software Guide.
Reading the LED Lamps
❖ For standard ethernet port
AQV563S
1. Green: comes on when the printer is properly
connected to the network.
2. Yellow: comes on when 100BASE-TX is being
used. It comes off when 10BASE-T is
being used.
AQV744S
AQV507S
Quick Installation Guide
USB Connection Ethernet Configuration
Make the following network settings according to the
network interface you are using.
You can use SmartDeviceMonitor for Admin or a Web
• The USB2.0 cable is not supplied. Obtain a cable
browser to make IP address-related settings in a TCP/
that is suitable for the computer you are using.
IP-capable environment.
• USB connection is possible under Windows Me/
2000/XP, Windows Server 2003, Mac OS 9.x, and
Mac OS X.
• Windows Me supports USB1.1 speeds.
• USB connection with Macintosh is only possible
• Configure the printer for the network using the
via the printer's USB port.
control panel.
• The following table shows the control panel
settings and their default values.
Connect the square-shaped connector
These items appear in the "Host Interface" menu.
of the USB2.0 cable to the USB port.
• After configuring the network settings, making
security settings is recommended. For details, see
Note to Administrator.
Setting Name
DHCP
IPv4 Address
Subnet Mask
Gateway Address
Frame Type (NW)
AQV506S
Active Protocol
Connect the opposite end's flat connec-
tor to devices such as your computer's
USB interface, or a USB hub.
Ethernet Speed
LAN Type
• If Auto Obtain (DHCP) is in use, the IPv4 address,
subnet mask, and gateway address are all set
automatically.
• Make this setting only when it is necessary. See
Software Guide.
Using DHCP
• When you use this printer in DHCP environment,
select [DHCP] following this procedure.
• When [DHCP] is selected, you cannot make
settings for the following items:
• IP Address
• Subnet Mask
• Gateway Address
• Consult your network administrator for information
about making network settings.
Value
On
011.022.033.044
000.000.000.000
000.000.000.000
Auto
IPv4 Active
IPv6 Active
NetWare Active
SMB Active
AppleTalk Active
Auto
Auto