Gestetner P7245 Hardware Manual page 116

Status
Paper gets wrinkles.
Paper is not fed from the select-
ed tray.
A printed image is different
from the image on the compu-
ter's display.
It takes too much time to turn on
the printer.
It takes too much time to resume
printing.
It takes too much time to com-
plete the print job.
Possible Causes, Descriptions, and Solutions
• Paper is damp. Use paper that has been stored properly.
See p.63 "Paper and Other Media".
• Paper is too thin.
See p.63 "Paper and Other Media".
• There may be a gap between the guides and the paper in
the paper tray. Make sure there are no gaps.
See p.71 "Loading Paper".
• The fusing unit is deteriorated or damaged. Replace the
unit. For replacing the unit, Maintenance Kit (optional) is
required.
When you are using a Windows operating system, the print-
er driver settings override those set using the control panel.
Set the desired input tray using the printer driver.
See the printer driver Help.
• When you use some functions, such as enlargement and
reduction, the layout of the image might be different from
that displayed in the computer display.
• You might have selected to replace True Type fonts with
printer fonts in the printing process.
To print an image similar to the image on the computer,
make the settings to print out True Type fonts as an image.
See the printer driver Help.
If the printer is turned off while it is still accessing the hard
disk (for example: during file deletion), the printer will re-
quire more time to power-up the next time it is turned on. To
avoid this time delay, do not turn the power off while it is in
operation.
• The data is so large or complex that it takes time to proc-
ess it. If the Data In indicator is blinking, the data is being
processed. Just wait until it resumes.
• If OHP transparencies is being used, printing takes more
time to start.
• The printer was in the Energy Saver mode. To resume
from the Energy Saver mode, the printer has to warm up,
and this takes time until printing starts. To disable the En-
ergy Saver mode, select [Off] for [Energy Saver] in the Sys-
tem menu.
• Photographs and other data intensive pages take a long
time for the printer to process, so simply wait when print-
ing such data.
Changing the settings with printer driver may help to
speed up printing.
See the printer driver Help.
• The data is so large or complex that it takes time to proc-
ess it. If the Data In indicator is blinking, the data is being
processed. Just wait until it resumes.
• If "Waiting... " appears on the display, the printer is now
warming up. Wait for a while.
Other Printing Problems
105
8