Using The Dynamic Dns Function - Gestetner P7245 Hardware Manual

Appendix
C
Click [Login].
The dialog box for entering the user name and password appears.
D
Enter the user name and password, and then click [OK].
Contact your administrator for information about the settings.
E
In the left area, click [Configuration], and then click [Network].
F
Click [TCP/IP].
G
Check that [Enable] is selected for [WINS] in the [Ethernet+IEEE 802.11b] col-
umn, and then enter the WINS server IPv4 address in [Permit SSL/TLS Com-
munication] and [Secondary WINS Server].
H
Click [Apply].
I
Quit Web Image Monitor.
Using telnet
See p.183 "Using telnet".

Using the Dynamic DNS Function

Dynamic DNS is a function which dynamically updates (registers and deletes)
records (A record and PTR record) managed by the DNS server. When a DNS
server is part of the network environment to which this printer, a DNS client, is
connected, records can be dynamically updated using this function.
Updating
9
Updating procedure varies depending on whether the printer IP address is static
or acquired by DHCP.
Note
❒ When the dynamic DNS function is not used, records managed by the DNS
server must be updated manually, if the printer's IP address is changed.
❒ To update the record using the printer, the DNS server has to have one of the
following:
• No security settings made.
• If security settings are made, an IP-specified client (this printer) permits
updating.
312