Gestetner P7245 Hardware Manual page 472

E
Click [OK].
The setting is changed.
F
Click [OK].
A security warning dialog box appears.
G
Check the details, and then click [OK].
[Installed] appears under [Certificate Status] to show that a server certificate for
the printer has been installed.
H
Quite Web Image Monitor.
Note
❒ Click [Delete] to delete the server certificate from the printer.
Reference
For details about the displayed items and selectable items, see Web Image
Monitor Help.
When the optional hard disk, optional SDRAM module or data storage
card is not installed, you can not operate. Then "An unexpected error has
occurred." appears.
Creating the Server Certificate (Certificate Issued by a Certificate Authority)
Create the server certificate using Web Image Monitor.
This section explains the use of a certificate issued by a certificate authority as
the server certificate.
A
Log on to Web Image Monitor in the administrator mode.
B
Click [Configuration], and then click [Device Certificate] in the "Security" area.
The [Device Settings] page appears.
C
Click [Request].
D
Make the necessary settings.
E
Click [OK].
[Requesting] appears for [Certificate Status] in the [Device Certificate] area.
F
Quite Web Image Monitor.
G
Apply to the certificate authority for the server certificate.
The application procedure depends on the certificate authority. For details,
contact the certificate authority.
Protection Using Encryption
9
303