Gestetner P7245 Hardware Manual page 446

Deleting all Hold Print files
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Hold Print], and then press {q Enter} key.
C
Press the {U} or {T} key to display [Del. All Files], and then press {q Enter} key.
The user ID and the time when the job was stored appear.
Depending on the security settings, certain print jobs may not be displayed.
D
Press the {U} or {T} key to confirm deleting all files, and then press {q
Enter} key.
To cancel deleting a Hold Print file, press the {Escape} key.
E
Press the {q Enter} key.
F
Press the {On Line} key.
The initial screen appears.
Using Stored Print
Important
❒ You need Mac OS X v10.2 or higher to use this function.
❒ To use this function, the optional hard disk must be installed on the printer.
❒ Stored Print files will not appear on the display panel if they have already
been printed or deleted using Web Image Monitor before you select [Stored
Print] using the control panel.
❒ Stored Print files printed or deleted using Web Image Monitor after you have
selected [Stored Print] using the control panel will still appear on the display
panel. However, an error message will appear if you try to print or delete
those Stored Print files.
❒ If the application has a collate option, make sure that it is not selected before
sending a print job. By default, Stored print jobs are automatically collated by
the printer driver. If the collate option is selected in the application print dia-
log box, more prints than intended may be printed.
❒ Print jobs are not saved on the hard disk in the following cases. You can check
the error log for jobs not saved.
• When there are 100 Sample Print, Locked Print, Hold Print and Stored
Print jobs saved on the hard disk.
• When the total number of pages saved on the hard disk exceeds 9,000 pages.
Using PostScript 3
277
8