Checking The Error Log - Gestetner P7245 Hardware Manual

Checking the Error Log

If files could not be stored due to printing errors, identify the cause of the errors
by checking the error log on the control panel.
Important
❒ The most recent 30 errors are stored in the error log. If a new error is added
when there are 30 errors already stored, the oldest error is deleted. However,
if the oldest error belongs to one of the following print jobs, it is not deleted.
The error is stored separately until the number of those errors reaches 30. You
can check any of these print jobs for error log information.
• Sample Print
• Locked Print
• Hold Print
• Stored Print
❒ If the main power switch is turned off, the log is deleted.
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display the print type you want to check, and
the press the {q Enter} key.
C
Press the {U} or {T} key to display [Error File(s)], and then press the {q En-
ter} key.
D
Press the {U} or {T} key to check the log.
Note
❒ Press the {On Line} key until the initial screen appears after checking the
log.
❒ To print files that appear in the error log, resend them after stored files
have been printed or deleted.
Checking the Error Log
109
3