Gestetner P7245 Hardware Manual page 171

Preparing for Printing
Note
❒ Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
❒ To stop installation of the selected software, click [Cancel] before installa-
1
tion is complete.
❒ Select a printer to whose IP address is displayed in [Connect To] to install
SmartDeviceMonitor for Client when using TCP/IP.
❒ Download the printer driver from the supplier's web site when using un-
der Windows NT 4.0.
Reference
Quick Install is not available unless bidirectional communication between
the printer and computer is enabled via parallel connection. See p.52 "If Bi-
directional Communication is Disabled" for details about bidirectional
communication between printer and computer.
If you connect using USB, see p.40 "Installing the Printer Driver Using
USB".
2