Chemical Resistance - cytiva NanoAssemblr Ignite Operating Instructions Manual

9.2

Chemical resistance

Cartridges
The Ignite and Ignite+ cartridges are composed of non-toxic cyclo olefin polymer
(COP), which offers good resistance to a wide range of temperatures and chemicals,
including acids and bases.
A list of chemicals to which COP exhibits good chemical resistance is provided below:
Chemical
Acetone
Acetic acid 99%
Ammonia 28%
Dimethyl sulphoxide (DMSO)
DMF (N,N-dimethylformamide)
Ethyl alcohol
Fluorinated oil
Formadide 50%
Glycerine
Hydrochloric acid 35%
Isopropyl alcohol
Methyl alcohol
Methyl cellosolve
Methyl phenyl silicon oil
Polyethylene glycol 50% (PEG4000S)
Saline
Sodium hydroxide, NaOH
Sulfuric acid 95%
Tween 20 10%
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA
NOTICE
Chemicals not on this list can be validated by the user under condi-
tions representative of the intended use. However, take caution
with oils and solvents of low polarity.
9 Reference information
9.2 Chemical resistance
Usage
Solvent
Aqueous solution
Aqueous solution
Solvent
Solvent
Solvent
Solvent
Aqueous solution
Aqueous solution
Aqueous solution
Solvent
Solvent
Solvent
Solvent
Aqueous solution
Aqueous solution
Aqueous solution
Aqueous solution
Aqueous solution
115