Advertisement
4.3
Moving the system
When moving the Ignite or Ignite+ system within and between sites, remove all
cartridges, syringes, or connection tubes. It is recommended to use two people to
move the instrument.
For transport between laboratories, use a cart dimensioned to accommodate the size
and weight of the instrument. For transport over longer distances, pack the instrument
securely in a protective box. Use the original packing material if possible.
Contact Cytiva for information on moving the system over longer distances.
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA
WARNING
When moving the instrument for maintenance or other purposes,
disconnect all cables from wall sockets and separate equipment so
that the cables do not pull on the instrument or equipment.
4 Installation
4.3 Moving the system
52
Advertisement
Need help?
Do you have a question about the NanoAssemblr Ignite and is the answer not in the manual?
Questions and answers