cytiva NanoAssemblr Ignite Operating Instructions Manual page 11

NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA
WARNING
Explosion hazard: Risk assessment. When using the instrument
with flammable liquids, perform a risk assessment for any risks due
to the process or process environment. Implement the risk reduc-
tion measures needed, including use of personal protective equip-
ment to reduce the risk of electric shock, fire and personal injury.
To be considered when performing the risk assessment:
• All personnel involved in operating, maintaining and servicing
the system must have proper knowledge of the local regulations
in environments where there is an explosion hazard.
• Risk of liquid spills. Prepare procedures for handling spills of
hazardous chemicals in a safe and efficient manner.
• Risk of fire. Do not use flammable liquids with an auto ignition
temperature of less than 250°C with the instrument. Remove
any external ignition sources or open flames in the vicinity of the
instrument.
• Risk of fire. Static discharge from the operator is a potential igni-
tion source. The instrument can be wiped down with a damp
cloth to avoid static buildup that can occur in dry ambient
conditions.
• Risk of fire. Depending on the input reagents, the collected
waste and formulation liquids might be flammable. When
formulation is complete, remove the collection vessels in a
timely manner and handle the liquids appropriately.
WARNING
Explosion hazard. The product is not approved for use in a poten-
tially explosive atmosphere. The product does not fulfill the
requirements of the ATEX Directive.
WARNING
Explosion hazard. Do not turn on the main power switch of the
instrument if there are flammable liquids or vapors in the imme-
diate surroundings.
WARNING
Explosion hazard. To avoid building an explosive atmosphere
when using flammable liquids, make sure that the room ventilation
meets the local requirements.
2 Safety instructions
2.1 Safety precautions
11