Start-Up And Shutdown; Start The Instrument - cytiva NanoAssemblr Ignite Operating Instructions Manual

6.2

Start-up and shutdown

Introduction
This section describes how to start and shut down the instrument.

Start the instrument

To start the instrument, press the power switch on the back of the instrument to the I
position.
When the instrument starts, the following occurs:
• The user interface and status indicator are illuminated.
• When the system is ready to use, the user interface displays the main menu.
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA
6 Operation
6.2 Start-up and shutdown
77