cytiva NanoAssemblr Ignite Operating Instructions Manual page 95

Step
4
5
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA
Action
Insert the R, C, and optional L syringes into the respective channels of the
rotating block.
Secure the syringes to the cartridge by doing one of the following:
a. Syringes with Luer fittings: Twist the syringe to engage the Luer connec-
tion.
NOTICE
Do not tighten the Luer connection too much. Tight-
ening the connection too much can damage the
syringe and the cartridge.
b. Syringes without Luer fittings: Push the syringe until you meet resist-
ance.
NOTICE
Do not insert the syringe too far. Inserting the syringe
too far can damage the syringe and the cartridge.
6.3 Run a procedure
6.3.6 Load syringes and collection tubes
6 Operation
95