cytiva NanoAssemblr Ignite Operating Instructions Manual page 82

Material
Reagents
Syringes
Sample collection tube
Waste collection tube
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA
6.3.2 Prerequisites and required materials
Description
• Two reagents that are mixed in the microfluidic
mixer of the cartridge.
• If using dilution, a dilution solution.
See Section 9.2 Chemical resistance, on page 115
determine if the reagents are compatible for use with
the system.
One syringe for each reagent (up to three syringes).
See Syringe compatibility, on page 112
syringes.
A collection tube that is large enough to hold the final
sample volume, and that is chemically compatible with
the reagents. See Collection tube compatibility,
on page 113 for compatible tubes.
A collection tube that is large enough to hold the start
and end waste, and that is chemically compatible with
the reagents. See Collection tube compatibility,
on page 113 for compatible tubes.
6 Operation
6.3 Run a procedure
to
for compatible
82