Advertisement
7.2
Service and preventive maintenance
Introduction
Regular service and maintenance of Ignite is necessary to maintain optimal condition
and to extend the operational lifetime of the system components.
Service and preventive maintenance work must be performed according to Cytiva
recommendations, and according to the maintenance instructions of the component
manufacturers.
Service frequency
The requirements for frequency of service and preventive maintenance depend on the
frequency of use and the specific applications performed.
A general recommendation is to schedule one service and preventive maintenance
visit every year. Adhere to the maintenance intervals.
If any component fails, it is recommended that it be replaced immediately to avoid
further damage to the system. Adhering to these guidelines will maximize the lifespan
of the system.
Service agreements
Contact your Cytiva representative for information about frequency of service require-
ments to suit individual process needs and for details of the Cytiva service agreement
options available for each instrument.
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA
7 Maintenance
7.2 Service and preventive maintenance
107
Advertisement
Need help?
Do you have a question about the NanoAssemblr Ignite and is the answer not in the manual?
Questions and answers