Clim (Basic Cli Control: 3300-3999) - Fujitsu XG2000 Series User Manual

XG2000 series User's Guide
A.2.5

clim (Basic CLI Control: 3300-3999)

Message ID
Severity
P3300
INFO
P3301
INFO
P3302
INFO
P3303
INFO
P3304
INFO
P3305
INFO
P3306
INFO
P3307
INFO
P3308
INFO
P3309
INFO
P3310
WARNING
cmd-exec[startup]: %1$
Explanation
The command in the startup-config was executed.
[[Inserted string]]%1$: Command string executed in the startup-config.
cmd-result[startup]: success
Explanation
The command in the startup-config was successfully completed.
cmd-result[startup]: error
Explanation
The command in the startup-config failed.
startup-config start.
Explanation
Starts startup-config file processing.
startup-config end.
Explanation
Startup-config file processing was successfully completed.
Line has connected. line-ID=%1$
Explanation
The telnet or SSH terminal was connected.
[[Inserted string]]%1$: Terminal ID
startup-config end(none).
Explanation
The startup-config file was not found.
startup-config end(error).
Explanation
Startup-config file processing failed.
cmd-result[startup]: skip
Explanation
Since the attempt to execute the previous command in startup-config resulted in an error, execution of the next
command was skipped.
Line has disconnected. line-ID=%1$
Explanation
The telnet or SSH terminal was disconnected.
[[Inserted string]]%1$: Terminal ID
Cannot find host %1$.
Explanation
Failed to find an IP address for the host name specified with the "log send" command.
[[Inserted string]]%1$: Host name specified with the "log send" command
Solution
Review the host name defined.
Check that DNS was configured.
All Rights Reserved, Copyright (C) PFU LIMITED 2009
Message/Explanation/Solution
292/315