Snmp - D-Link DSL-2750U User Manual

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual

SNMP

On the Advanced / SNMP page, you can enable and configure the SNMP agent. The agent is
used to collect data on the state of the router and manage the device via the SNMP protocol.
To allow the router to use the SNMP agent, select the Enable/Disable SNMP checkbox and set
the needed values in the fields on the page.
Parameter
Read-only access
community name
Read-write access
community name
System name
System location
The contact information
for the administrator
IP address
When you have specified the needed settings, click the Change button.
To disable the SNMP agent, deselect the Enable/Disable SNMP checkbox.
Figure 79. The Advanced / SNMP page.
The name of the group of accounts which have read-only access to
the router.
The name of the group of accounts which have read/write access to
the router.
A name of the router for the SNMP manager.
Additional information on the router's location.
Additional information on the contact of the router's administrator.
The IP address of the host on which the SNMP manager is located.
Page 93 of 138
Configuring via Web-based Interface
Description