Table of Contents
Advertisement
In the Line section, you can make these settings:
Default – use to set the specific line to apply the Advanced settings to, or keep the
default Any Line setting for settings to apply to all lines.
Baud Rate – set the maximum baud rate at which faxes are to be transmitted.
In the Retries section, you can make these settings:
Number of Retries – set the default maximum number of times the FaxPress will
try to send faxes before returning a failure message.
Time between – set an interval in minutes between each retry attempt.
In the Resolution section, select a degree of resolution; fine resolution will make for
clearer images, but faxes will cost more to send.
Standard resolution is 200 X 100 dpi.
Fine resolution is 200 X 200 dpi.
Configuring Incoming Fax Properties
To configure the forwarding and fax disposition option for your faxes, follow these steps:
1.
Right click on your account (or mailbox) and select Properties from the context
menu. The User Properties dialog box will be displayed.
2.
Select the Incoming Faxes tab.
FaxPress User Guide
User Guide > Configuring User Properties
47
Advertisement
Table of Contents
