Canon FaxPhone L170 Basic Manual page 172

6.POLLING BOX
1.SETUP FILE
2.CHANGE DATA
3.DELETE FILE
7.SYSTEM SETTINGS
1.MEMORY LOCK RX
15
15-12 Menu Descriptions
Name
1.FILE NAME
2.PASSWORD
3.ERASE AFTER TX
1.FILE NAME
2.PASSWORD
3.ERASE AFTER TX
OFF
ON
1.MEM LOCK PASSWORD
2.REPORT
OUTPUT NO
OUTPUT YES
Descriptions
Sets the functions of SETUP FILE, CHANGE
DATA and DELETE FILE.
Registers a polling box.
Enters a name for poling box (max. 24
characters, including spaces).
Enters a password to protect the polling box
settings (max. 7 characters).
Tells the machine how to handle a document
after it is polled and sent.
ON, OFF
Changes the settings of the polling box.
Changes the file name.
Changes the password.
Changes the ERASE AFTER TX setting.
Deletes the polling box and all of its settings.
Sets the functions of MEMORY LOCK RX and
FAX DEFAULT.
Set the Memory Lock functions.
Prints a document as soon as the machine
receives it.
Receives and stores all documents in memory.
They will not be printed out unless the Memory
Lock password is entered.
0 to 9999999
This password protects the Memory Lock
settings. Setting a password is recommended.
You must use this password to unlock the
memory so you can print documents stored in
memory. Use the numeric buttons to enter a
password (up to seven digits).
Sets the machine to print reports. This setting
affects only reports that print automatically,
such as an Activity Report.
No report prints while in the Memory Lock
mode.
A report prints while the machine is in the
Memory Lock mode.
(The factory default setting is in bold face.)