The Operation Panel - Canon FaxPhone L170 Basic Manual

The Operation Panel

l
a
Menu button
Use this button to customize the operation of the machine.
b
In Use/Memory indicator
Lights when the telephone line is used or a document has been received in
memory.
c
LCD display
The LCD display shows messages and prompts while you use the machine.
d
COPY button
Use this button to switch standby display to Copy mode.
e
FAX button
Use this button to switch standby display to Fax mode.
f
Alarm indicator
This indicator flashes when an error occurs, or when the machine is out of paper
or toner.
g
Status Monitor button
Use this button to check the status of copy, fax, print and report jobs.
h
Energy Saver button
Use this button to set or cancel the energy saver mode manually. The button
lights green when the energy saver mode is enabled.
i
Numeric buttons
Use these buttons to enter numbers and names when registering information,
and to dial fax/telephone numbers.
j
Tone button
Use this button to use tone dialing temporarily when your machine is set for
pulse dialing.
k
Enlarge/Reduce button
Use this button to set an enlargement or reduction ratio of a copy.
l
Exposure button
Use this button to adjust the copy exposure.
m
Image Quality button
Use this button to select the resolution the machine will use for the document
you want to fax, or copy.
n
Stop/Reset button
Use this button to cancel sending or receiving faxes and other operations, and
bring back the standby display in the LCD.
o
(-), (+) button
Use this button to scroll through the selections.
p
Set button
Use this button to register your settings. Also, if the document being scanned
stops in the ADF, pressing this button makes the document come out
automatically.
q
Start button
Use this button to begin faxing, or copying.
r
Hook button
Use this button to dial, even with the handset still in the handset cradle.
s
Directory button
Use this button to look up fax/telephone numbers registered for speed dialing.
t
Coded Dial button
Use this button to dial a fax/telephone number that you have registered for
Coded Speed Dialing.
u
Redial/Pause button
Use this button to redial the last number that was dialed using the numeric
buttons, or to enter pauses in a fax number.
v
One-Touch Speed Dial buttons
Use these buttons for One-Touch Speed Dialing.
w
One-Touch Speed Dial panel
Open this panel to access the special function buttons.
Getting Acquainted With Your Machine
2
2-11