Manual Sending Via The Handset - Canon FaxPhone L170 Basic Manual

Manual Sending Via the Handset

Use manual sending when you want to talk to the other party before sending a document, or if the other party does not
have a fax machine that can receive automatically.
Follow this procedure for manual sending:
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see "Document Requirements," on
p. 6-1, and "Loading Documents in the ADF" on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
3
Adjust any necessary settings for your document.
•
Press [Image Quality] to select the fax resolution. (See "Adjusting the Image Quality (Resolution)," on p. 6-4.)
6
•
Press [Exposure] to select the scan density. (See "Adjusting the Exposure (Density)," on p. 6-5.)
4
Pick up the handset.
5
Dial the other party's fax/telephone number.
For details on the different dialing methods, see "Dialing Methods," on p. 6-6.
6
Talk through the handset to the other party.
If you hear a high-pitched signal instead of the other party's voice, go to step 8.
7
Ask the other party to set their fax machine to receive faxes.
8
When you hear a high-pitched signal, press [Start] © hang up the handset.
NOTE
To cancel manual sending, press [Stop/Reset].
6-8 Sending Documents