Power Supply - Canon FaxPhone L170 Basic Manual

•
Place the machine on a flat, stable, vibration-free surface that is strong enough to
support its weight.
•
Do not place objects around the power plug so that you are able at any time to
readily disconnect the power plug from the wall outlet. Otherwise you will be unable
to disconnect the power plug in case of an emergency.
•
Make sure the area is free from dust.
•
Make sure the location is not affected by extreme temperature changes, and always
stays between 50°F and 90.5°F (10°C and 32.5°C).
•
Make sure the relative humidity of the area is between 20% and 80%.
•
Keep the machine away from direct sunlight.
•
Do not use or store the machine outdoors.
•
Do not install the machine near devices that contain magnets or generate magnetic
fields, such as speakers.
•
To ensure proper ventilation, make sure the machine is approximately 4 inches (10
cm) away from walls and other equipment.

Power supply

WARNING
•
Do not damage or modify the power cord and power plug. Also do not place heavy
objects on the power cord, pull on it, or extensively bend it. These actions may cause
electrical damage and result in a fire or electrical shock.
•
Do not insert or unplug the power plug with wet hands, as this may result in electrical
shock.
•
Do not overload the wall outlet with too many electrical appliances, as this may
result in a fire or electrical shock.
•
Plug the machine into a standard 120 V AC, 60 Hz, three-prong grounded outlet.
Operate the machine only from the type of power source indicated on the machine's
label or a fire, electrical shock or malfunction may occur. If you are not sure of the
type of power available, consult your local power company.
•
Do not allow the power cord to be near objects that emit heat. The outer cover of the
power cord may melt resulting in fire or electrical shock.
•
Make sure the power cord is fully extended and has no knots in it when electricity is
running through it. Knots etc. in the cord may result in fire or electrical shock.
•
Fully insert the power plug securely into the electrical outlet. If the prongs of the
power plug come into contact with metallic objects etc., it may result in fire or
electrical shock.
vi
Where to Find Help