Testing The Machine - Canon FaxPhone L170 Basic Manual

2
Insert the envelope straightly in the multi-purpose feeder with the print side up and the right edge (i.e., closer to the stamp)
first.
Envelopes with a flap on the short edge cannot be used.
3
Specify the paper size.
❑
Press [Menu] © press [Set].
❑
Press [ (-)] or [ (+)] to select <2.MP TRAY> © press [Set] twice.
❑
Press [ (-)] or [ (+)] to select <ENVELOPE> © press [Set].
4
❑
Press [ (-)] or [ (+)] to select the appropriate envelope type © press [Set] twice.
NOTE
You can select <FREESIZE> instead of <ENVELOPE> as the paper size. When <FREESIZE> is selected, you can specify vertical and
horizontal sizes of the envelope in the following ranges:
- <VERTICAL SIZE>: 127 mm to 356 mm (5" to 14")
- <HORIZONTAL SIZE>: 76 mm to 216 mm (3" to 8 1/2")
4
Specify the paper type.
❑
Press [ (-)] or [ (+)] to select <HEAVY PAPER> or <HEAVY PAPER H> © press [Set].
❑
Press [Stop/Reset] to return to standby mode.

Testing the Machine

After you have assembled your machine, installed the toner cartridge, loaded paper, you can make sure the machine is
printing properly by making several copies of a document. For instructions, see Chapter 10, "Making Copies."
Note the following:
•
If the printed sheets are curled as they exit the machine, remove them from the output slot immediately to avoid paper
jams.
•
Make sure your text or graphics fall within the printable area.
4-10 Loading Paper