Cleaning The Adf Area - Canon FaxPhone L170 Basic Manual

Cleaning the ADF Area

Black lines may appear in printouts when the ADF is used to feed documents.
This is caused by paste, ink, correction fluid, or other foreign matters in the read area of the ADF. Use a clean soft cloth to
wipe the read area clean. Take particular care to clean at the locations where the black lines are appearing on printouts.
If you have trouble getting the glass clean, wipe with a cloth moistened with water or a mild neutral detergent, and then
wipe the glass dry with another cloth.
IMPORTANT
Paste, ink, correction fluid, and other foreign matter can soil the scanning glass when you send a document through the ADF while the
paste, ink, or correction fluid on the original is still wet. This is what causes black lines on copies. Whenever you load a document is the
ADF, always check to make sure that any paste, ink, or correction fluid that is on the document is completely dry.
NOTE
When you unplug the machine, any documents stored in memory will be erased if you leave the machine unplugged for 1 hour or more. Be
sure to plug in the machine after cleaning to avoid this happening.
14
14-2 Cleaning the Machine
Copy
Black lines
Read area
Paste,ink,
correction fluid,
etc