Canon FaxPhone L170 Basic Manual page 34

Connect the power cord as follows:
1
Plug the supplied power cord into the power connector on the back of the machine.
2
2
Plug the other end of the power cord into the outlet.
NOTE
The machine has no power switch, so its power is on as long as it is plugged in. Once connected, though, the machine still needs to warm
up before you can use it.
While the machine is warming up, the message <PLEASE WAIT> appears in the LCD display:
P L E A S E W A I T
1 2 / 3 1 / 2 0 0 4 W E D 1 5 : 1 1
F a x O n l y
NOTE
If the toner cartridge has not been installed yet, the message <INSTALL CARTRIDGE> appears in the LCD display, and the Alarm
indicator flashes. In this case, install the toner cartridge. (See "Installing/Replacing the Toner Cartridge," on p. 2-16.)
2-8 Making Connections
S T A N D A R D