Confirming Transmission Results And Sending Reservation; Deleting A Fax Job - Canon FaxPhone L170 Basic Manual

Confirming Transmission Results and Sending Reservation

Follow the procedure below to confirm the sending or receiving results and sending reservation (automatic redialing and
delayed sending).
1
Press [System Monitor] repeatedly until <FAX MONITOR> is displayed.
2
Press [ (-)] or [ (+)] to select <2.TX/RX RESULT> © press [Set].
The sending result and reservation can be confirmed by checking the sending time, <TX/RX NO.> or fax number.
3
Press [ (-)] or [ (+)] to confirm the sending result and reservation.
1 5 : 3 4 0 0 1 0 T X S T N D B Y
[ 0 1 ] C A N O N U S A
NOTE
•
To return to standby mode, press [Stop/Reset].
•
If you perform the procedure above when there is no sending reservation and transmission jobs, <NO DOC. STORED> will appear, and
the display will return to the display shown in step 2.

Deleting a Fax Job

Follow the procedure below to delete the documents waiting to be sent by automatic redialing or delayed sending.
1
11
Press [System Monitor] repeatedly until <FAX MONITOR> is displayed.
2
Press [ (-)] or [ (+)] to select <3.DELETE DOCUMENT> © press [Set].
3
Use the numeric buttons to enter the transmission number of the fax job you want to delete © press [Set].
T X R X N O .
NOTE
You can check the transmission number of the reserved fax job by printing the DOCUMENT MEMORY LIST. (See p. 12-10.)
4
If you want to delete the fax job, press [
If you change your mind and do not want to delete the fax job, press [
11-2 Checking the Status of Copy, Fax, Print and Report Jobs
O K T O D E L E T E ?
©
0 0 5 5 < Y E S
(-)] for <YES>.
N O >
(+)] for <NO>.