Using Coded Speed Dialing - Canon FaxPhone L170 Basic Manual

Canon faxphone l170: basic guide
Hide thumbs Also See for FaxPhone L170:
Table of Contents

Advertisement

Using Coded Speed Dialing

Once you have registered your numbers under Coded Speed Dialing codes, you can send documents as follows:
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see "Document Requirements," on
p. 6-1, and "Loading Documents in the ADF," on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
3
Adjust any necessary settings for your document.
Press [Image Quality] to select the fax resolution. (See "Adjusting the Image Quality (Resolution)," on p. 6-4.)
Press [Exposure] to select the scan density. (See "Adjusting the Exposure (Density)," on p. 6-5.)
4
Press [Coded Dial] © use the numeric buttons to enter the two-digit code assigned to the number to which you wish to fax.
T E L =
The name registered under that Coded Speed Dialing code is displayed. If no name is registered, the number registered under that
code will be displayed.
If you mistakenly enter the wrong code, press [Stop/Reset] © [Coded Dial] © enter the correct code.
If no fax number is assigned to the Coded Speed Dialing code you press, the LCD displays <NOT REGISTERED>. If this happens,
make sure you enter the correct code and that the number you want to dial is registered under that code.
5
Press [Start].
If you do not press [Start] within 5 seconds of entering the Coded Speed Dialing code, the machine will begin sending automatically. If
you do not want the machine to send automatically, you need to change the <TIME OUT> setting. See p.15-9 for more details.
If an error occurs during sending, the machine will print an error report. If this happens, try sending the fax again. See "Faxing
Problems," on p. 13-12 for details about errors.
NOTE
You can also use Coded Speed Dialing to send a document to more than one location at a time. For details, see "Group Dialing," on p. 5-8,
and "Sequential Broadcasting," on p. 6-12.
T E L =
4 5 6 x x x x
©
0 4 C a n o n C A N A D A
Coded Speed Dialing
5-7
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents