Receiving Faxes Manually: Manual Mode - Canon FaxPhone L170 Basic Manual

6
Press [ (-)] or [ (+)] to set the time the machine rings while waiting for someone to pick up the handset © press [Set] twice.
F / T R I N G T I M E
You can use the numeric buttons instead of using [ (-)] or [ (+)] to set the time.
7
Press [ (-)] or [ (+)] to select <RECEIVE> or <DISCONNECT> © press [Set].
F / T S W I T C H A C T I O N
This setting tells the machine what to do if no one picks up the handset within the specified ring time set in step 6.
8
Press [Stop/Reset] to return to standby mode.

Receiving Faxes Manually: Manual Mode

To use this mode, you must have the handset or a telephone connected to the machine. In Manual Mode, the machine rings
every time it receives a call, whether the call is from a telephone or a fax machine.
NOTE
Make sure the <REMOTE RX> setting in the <RX SETTINGS> menu is enabled. See p. 15-11 for details.
7
If you use your machine with Manual Mode, answer incoming calls as follows:
1
When the handset or the telephone rings, pick up the receiver.
G If you hear a person's voice:
❑
Start your conversation. If the caller wants to send a document after talking to you, ask them to press the start button on their fax
machine. When you hear a beep, press [Start] to begin receiving the document, then hang up.
G If you hear a slow beep or silence:
❑
A fax machine is trying to send you a document.
Press [Start] on the machine, then hang up.
-or-
Enter the two-digit ID code from the telephone, then hang up.
7-4 Different Ways to Receive a Fax
F / T S W I T C H A C T I O N
©
0 1 5 S E C
R X S E T T I N G S
©
D I S C O N N E C T 3 . D R P D : S E L E C T F A X
R E C E I V E