Loading Documents in the ADF
1
Fan the edges that will feed into the machine first, then tap the edges of multiple page documents on a flat surface to even the
stack.
2
Adjust the document guides to the width of the document.
3
Load the document faced down in the ADF.
The document is now ready for scanning.
NOTE
•
For multiple page documents, the pages are fed one by one from the top of the stack (from the first page).
•
Wait until all pages of your document have been scanned before starting a new job.
•
50 sheets of LTR-size documents or 20 sheets of LGL-size documents can be set in the ADF. If more than 50 sheets of LTR-size
documents or 20 sheets of LGL-size documents are set in the ADF, paper jams may occur.
Preparing to Send a Fax
6-3
6