Positioning The Spool Stand; Attaching The Embroidery Frame Holder - Brother PR-600 Manual

Sapphire.book Page 11 Friday, August 1, 2003 9:12 AM

Positioning the spool stand

Secure the spool stand in the embroidering position.
1 Loosen the thumb screw, and then open up
the spool stand to the left and right.
1 Thumb screw
2 Spool stand
2
After the spool stand is fully opened up,
tighten the thumb screw.
Secure the spool stand in the opened
position.
1
2
Attaching the embroidery
frame holder
Attach the embroidery frame holder to the carriage.
1 Remove the two thumb screws of the
embroidery frame holder.
1 Thumb screws
2 Align the holes in the embroidery frame
holder with the pins on the frame-mounting
plate of the carriage.
1 Pins on the frame-mounting plate
2 Holes in the embroidery frame holder
Setting Up the Machine
1
11