Brother PR-600 Manual page 125

Sapphire.book Page 107 Friday, August 1, 2003 9:12 AM
5 With one character entered, if necessary,
change the size of the character.
1 Touch this key to change the size.
■ Changing the size
After selecting the first character, touch
until the character is the desired size.
• The next characters that are selected will
have the new character size.
• The character size of all entered characters
cannot be changed after the characters are
combined. (The size of the entire pattern can
be changed from the pattern editing screen.)
Note
● Two small fonts are not allowed to change
the size.
6
To enter multiple characters, repeat steps
4
and until all desired characters are
entered.
The selected characters appear in the
pattern display area.
1 If the wrong character was selected or you wish
to select a different character, touch
delete the last character selected, and then touch
the key for the desired character. Each touch of
deletes the last character of the text.
• If the text is small and difficult to read on the
screen, touch
1 Touch this key to display the text preview screen.
After checking the text, touch
to the text input screen.
7 If necessary, change the text arrangement.
3
1 Touch this key to change the text arrangement.
to
Selecting an Embroidery Pattern
to check the text.
to return
107
5