Rotating A Pattern - Brother PR-600 Manual

Sapphire.book Page 121 Friday, August 1, 2003 9:12 AM
2 Touch the keys to adjust the pattern to the
desired size.
Each touch of a key slightly enlarges or reduces
the pattern.
The size of the pattern is displayed after a key
is touched to change it.
1 Vertical length
2 Horizontal length
• The size that the pattern can be enlarged
depending on the pattern or character.
• Depending on the pattern or character, if it is
rotated 90 degrees it may be enlarged even
more.
• If the pattern is rotated, the vertical and
horizontal directions may be reversed.
• To return the pattern to its original size,
touch so that it changes to
3 If necessary, touch the arrow keys to adjust
the position of the pattern.
For more details, refer to page 119.
4 After making the desired changes, touch
.
The pattern editing screen appears again.
CAUTION
●
After changing the size of the pattern,
check the icons for the embroidery
frames that can be used and use only the
indicated frames. If a frame other than
those indicated are used, the presser foot
may hit the embroidery frame and cause
injuries.

Rotating a pattern

The pattern can be rotated between 1 and 359
degrees either clockwise or counterclockwise.
1 Touch
The screen shown below appears.
.
Example: Original angle
1 Rotates 90 degrees to the left
2 Rotates 10 degrees to the left
3 Rotates 1 degree to the left
4 Rotates 90 degrees to the right
5 Rotates 10 degrees to the right
6 Rotates 1 degree to the right
7 Touch this key to return the pattern to its original
angle.
8 Moves the pattern in the direction of the arrow on
the key.
9 Touch this key to close this screen.
Editing the Embroidery Pattern (Pattern Editing Screen)
.
121
5