Positioning The Spool Stand; Attaching The Embroidery Frame Holder - Brother PR-620 Operation Manual

Positioning the spool stand

Secure the spool stand in the embroidering position.
1 Loosen the thumb screw, and then open up
the spool stand to the left and right.
1 Thumb screw
2 Spool stand
After the spool stand is fully opened up,
2
tighten the thumb screw.
Secure the spool stand in the opened
position.
1
2
Attaching the embroidery
frame holder
Attach the embroidery frame holder to the carriage.
1 Remove the two thumb screws of the
embroidery frame holder.
1 Thumb screws
Align the holes in the embroidery frame
2
holder with the pins on the frame-mounting
plate of the carriage.
1 Pins on the frame-mounting plate
2 Holes in the embroidery frame holder
Setting Up the Machine
1
11