Brother PR-600 Manual page 135

Sapphire.book Page 117 Friday, August 1, 2003 9:12 AM
• If the wrong pattern was selected or you
wish to select a different pattern, touch the
desired pattern.
■ Deleting a pattern
From this screen, the embroidery data stored on
the floppy disk can be organized by deleting
unnecessary data.
After selecting the pattern that you wish to delete,
touch to display the screen shown below.
However, if the floppy disk is write-protected, the
data cannot be deleted.
1 Deletes the data, then returns to the data with no
pattern selected
2 Does not delete the data, then returns to the data
before was touched
4 Touch .
This confirms the pattern selection.
The pattern editing screen appears.
Selecting an Embroidery Pattern
5
117