Brother PR-600 Manual page 155

Sapphire.book Page 137 Friday, August 1, 2003 9:12 AM
1 Touch this key to delete the selected pattern.
2 Shows the amount of free space in the machine's
memory.
• If the wrong pattern was selected or you
wish to select a different pattern, touch the
desired pattern.
3 Touch .
The screen shown below appears.
4 To delete the data, press
The pattern is deleted, and if there is
enough space, the new pattern is
automatically saved.
• To quit deleting, press
5 If there is not enough space, delete another
pattern.
If the embroidery data was saved
successfully, the previous screen
automatically appears.
• Saving the data takes approximately 10
seconds.
■ Recalling stored patterns
Refer to the appropriate page of "Selecting an
Embroidery Pattern" according to the media being
used. (For patterns saved on the machine, refer to
page 108. For patterns saved on CompactFlash
cards, refer to page 114. For patterns saved on
floppy disks, refer to page 116.)
.
.
Note
• Do not turn off the machine while the
"Saving" message is displayed, otherwise
the pattern data being saved may be lost.
Saving Embroidery Patterns
5
137