Selecting The Pattern To Be Edited; Moving A Pattern - Brother PR-600 Manual

Sapphire.book Page 119 Friday, August 1, 2003 9:12 AM
Selecting the pattern to be
edited
If multiple patterns are selected, you can choose
which pattern will be edited.
Touch or
1
The pattern that will be edited is the pattern
enclosed by the red frame.
Continue touching
the red frame is around the pattern that you
wish to edit.
The patterns are selected in the order or the
opposite order that they were added to the
pattern.
1 Red frame indicating the pattern to be edited
Memo
● If multiple patterns appear in the pattern
editing screen, the basic editing procedure
is to 1. select the pattern to be edited, and
then 2. edit that pattern.
Determine where in the embroidery frame the
pattern will be embroidered. If multiple patterns are
combined, move each pattern to lay out the design.
1
.
and until
Editing the Embroidery Pattern (Pattern Editing Screen)

Moving a pattern

Touch the key for the direction where you
wish to move the pattern.
The pattern moves in the direction of the
arrow on the key.
1 Shows the vertical distance moved
2 Shows the horizontal distance moved
• To return the pattern to its position before it
was moved (center of the embroidery frame),
touch .
Memo
● The pattern can also be moved by touching
the arrow keys in the screens that appear
when any of the other editing keys are
touched.
● The arrow keys in the embroidering settings
screen are used to move the frame to select
the embroidering position.
5
119