Table of Contents
Advertisement
NAMES OF MACHINE PARTS
Memo
• To obtain optional accessories or parts, contact
your authorized Brother dealer or visit our site
" http://s.brother/cpeaa/ ".
• All specifications are correct at the time of printing.
Please be aware that some specifications may
change without notice.
• A variety of feet are available to enable different
types of stitching and finishes. Visit your nearest
authorized Brother dealer or our site " http://
s.brother/cpeaa/ " for a complete listing of optional
accessories available for your machine.
• Always use accessories recommended for this
machine.
Using the Multi-Purpose Screwdriver
(Included with Some Models)
Since the screwdriver can be changed to three different
positions, it can be extremely useful for the various
machine preparations.
Position "1"
You can install/remove the presser foot holder,
needle clamp screw.
Position "2"
You can install/remove the needle plate.
Position "3"
The multi-purpose screwdriver can be
positioned over the screw on the embroidery
frame to tighten the screw after hooping the
fabric or when removing the fabric.
Using the Spool Stand (Included with Some
Models)
The included spool stand is useful when using thread
spools with a large diameter (cross-wound thread). The
spool stand can hold two spools of thread.
1
2
4
5
20
7
No.
1
2
3
4
5
6
7
8
9
■ How to Assemble the Spool Stand
a
3
6
8
Part Name
Telescopic thread guide
Spool support
Spool pin × 2
Screw and washer
Spool cap (XL) × 2
Spool holder × 2
Spool cap base × 2
Spool felt × 2
Ring × 4
CAUTION
• Do not lift the handle of the machine while the
spool stand is installed.
• Do not push or pull the telescopic thread
guide or spool pins with extreme force,
otherwise damage may result.
• Do not place any object other than spools of
thread on the spool support.
• Do not try to wind thread on the bobbin while
sewing using the spool stand.
Fully extend the telescopic thread guide shaft, and then
rotate the shaft until the two internal stoppers click
into place.
9
Part Code
XE0776-001
XE4637-001
XA6313-051
XC7568-051
XE0779-001
XA0679-050
XE0780-001
XC7134-051
026030-136
Advertisement
Table of Contents
