— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Positioning the spool stand
Secure the spool stand in the embroidering
position.
1
Loosen the thumb screw, and then open up
the spool stand to the left and right.
1 Thumb screw
2 Spool stand
2
After the spool stand is fully opened up,
tighten the thumb screw.
Secure the spool stand in the opened
position.
Attaching the embroidery
frame holder
Attach the embroidery frame holder to the carriage.
1
Remove the two thumb screws of the
embroidery frame holder.
1 Thumb screws
2
Align the holes in the embroidery frame
holder with the pins on the frame-mounting
plate of the carriage.
1 Pins on the frame-mounting plate
2 Holes in the embroidery frame holder
Setting Up the Machine 29
1