Brother PR-600 Manual page 180

Sapphire.book Page 162 Friday, August 1, 2003 9:12 AM
Appendix ———————————————————————————————————————————————————————————
3 With a fabric marker, mark this point on the
fabric.
4 Set the beginning of stitching in the lower-
right corner.
The frame moves so that the needle drop
point aligns with the beginning of stitching.
5 With a fabric marker, mark this point on the
fabric.
162
6 Remove the embroidery frame from the
machine, and then connect these two points
to check the embroidering position.
• If the baseline is misaligned or intersects
another line, reframe the fabric in the
embroidery frame or adjust the position of
the pattern.