Adjusting The Operation Panel Position - Brother PR-600 Manual

Sapphire.book Page 9 Friday, August 1, 2003 9:12 AM
Adjusting the operation panel
position
Adjust the orientation and angle of the operation
panel so it can easily be operated.
1 Loosen the thumb screw to bring the
operation panel forward.
1 Thumb screw
2 Adjust the operation panel to an easy-to-
operate position, and then tighten the thumb
screw.
1
3 Adjust the orientation of the operation panel.
Loosen the thumb screw, adjust the operation
panel to an easy-to-view orientation, and then
tighten the thumb screw.
1 Thumb screw
4 Adjust the angle of the operation panel.
Loosen the thumb screw, adjust the operation
panel to an easy-to-view angle, and then
tighten the thumb screw.
1 Thumb screw
Note
● Using the disc-shaped screwdriver
included, loosen and firmly tighten the
thumb screw.
Setting Up the Machine
1
1
1
9