Characteristics; Configuration - ADF Web HD67675-IP-A1 User Manual

Industrial Electronic Devices

CHARACTERISTICS:

The HD67675-xxx-A1 are BACnet slave / PROFIBUS master Converter.
It allows the following characteristics:
Triple isolation between BACnet/PROFIBUS, BACnet/Power Supply, PROFIBUS/Power Supply;
Two-directional information between BACnet and PROFIBUS bus;
Connect PROFIBUS DP-V0 slave devices;
Available BACnet objects Type: Analog-Input, Analog-Output, Analog-Value, Binary-Input, Binary-Output, Binary-Value, Positive-
Integer-value, Integer-Value, Large-Analog-Value, MultiState-Input, MultiState-Output, MultiState-Value, Life-Safety-Point, Life-
Safety-Zone, Access-Door, Accumulator;
Available BACnet Property: Present-Value;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8...24V AC or 12...35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].

CONFIGURATION:

You need Compositor SW67675 software on your PC in order to perform the following:
Define the parameter of the PROFIBUS;
Define the parameter of the BACnet;
Define the PROFIBUS network;
Define the BACnet data that a master read;
Define the BACnet data that a master write;
Update the device.
ADFweb.com S.r.l.
User Manual BACnet slave / PROFIBUS master - Converter
Document code: MN67675_ENG Revision 1.010 Page 9 of 40